Sibikec Gas Holding

Copper Processing Industry

The copper processing industry mainly uses for copper strip, copper tube, copper wire and other copper products. The high-purity nitrogen-hydrogen mixture is used in the bell-type annealing furnace. High-purity nitrogen is required for purging before and after annealing (generally 99.999%). Copper or air-cushion furnaces are produced in a low hydrogen ratio mixture atmosphere....

ПОСМОТРЕТЬ

Iron & Steel Industry

Supplies high-purity nitrogen, hydrogen and nitrogen-hydrogen mixed gas for the iron & steel industry, to be used in the bright annealing process of stainless steel, high carbon steel and general strip steel. The furnace types are: continuous annealing furnace and bell-type annealing furnace. Gas purity requirements: nitrogen purity is usually 99.9995%, hydrogen purity is usually 99.999%, while the mixture ratios are: H2 ratio is 5%-50%, N2 ratio is 50%-95%....

ПОСМОТРЕТЬ

Heat Treatment Industry

Nitrogen gas acts as a protective atmosphere in the heat treatment industry. The purity of nitrogen is generally 99.9% - 99.9995%. Mainly used in carburizing, nitriding, quenching, tempering, bright quenching, spheroidizing annealing, recrystallization annealing. The main furnace types are: heat treatment furnace, nitrogen-based protective atmosphere roller hearth furnace, mesh belt annealing furnace, atmosphere furnace, vacuum furnace, pit type furnace, bell type furnace and continuous quenching and tempering production line....

ПОСМОТРЕТЬ

Oil and Gas Industry

Nitrogen gas in the oil & gas industry generally has a purity of 95% to 99.9%. The gas flow rate is generally quite large, mainly used in chemical fiber, chlor-alkali, LNG, coal chemical, tank purging and other various chemical products....

ПОСМОТРЕТЬ

Lithium Battery Industry

Nitrogen gas is used for cooling and drying of lithium batteries and for preventing high temperature oxidation. Nitrogen can also remove oxygen from the solution to prevent oxygen from participating in the electrode reaction, corroding the electrode and keeping the electrolyte stable. The main application products are lithium battery powertrain, carbon nanotubes, supercapacitors, graphite anode materials, lithium iron phosphate cathode materials and ternary materials. Nitrogen purity is generally required to be 99.99%-99.9995%....

ПОСМОТРЕТЬ

Electronics Industry

The electronics industry is primarily concerned with SMT, chip packaging, capacitors, LEDs, electronic ceramics and diode triodes. Typical nitrogen use purity is from 99.99% to 99.9995%....

ПОСМОТРЕТЬ

ПРИЛОЖЕНИЯ

ПРИЛОЖЕНИЯ

Copper Processing Industry

Iron & Steel Industry

Heat Treatment Industry

Oil and Gas Industry

Lithium Battery Industry

Electronics Industry

О НАС

ТОВАРЫ

ПРИЛОЖЕНИЯ

СКАНИРОВАНИЕ QR